Strange Error with VideoStitch Studio and PTGUI

Home › Forums › 360° Video › Strange Error with VideoStitch Studio and PTGUI

  • This topic has 1 reply, 1 voice, and was last updated 3 years, 3 months ago by Peter Armbrüster.
Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • June 10, 2020 at 10:02 am #24477

    Peter Armbrüster
    Forum Member
    • Forum Posts: 2
    • ★

    Hi,
    Has any experience with VideoStitch Studio?
    I use the free version 2.4 and PTGUI 11.28 for calibration on a Windows 10 PC.
    To test the workflow I cropped a video in two parts with overlapping.
    Both videos are loaded into VideoStitch Studio and two images are extracted.
    These images are reassembled in PTGUI.
    The project is then saved as a template and loaded into VideoStitch Studio.
    An error message appears: Could not apply calibration Template; Invalid configuration; The calibration has 0 video inputs, the current panorama has 2.
    What is my mistake?
    Thank you very much for the help.
    Peter

    June 10, 2020 at 3:43 pm #24478

    Peter Armbrüster
    Forum Member
    • Forum Posts: 2
    • ★

    I found the problem.
    PTGUI 11 use a new data format for template.
    PTGUI 10 will work with the old.

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.