Forum Replies Created

Viewing 1 post (of 1 total)
  • Author
    Posts
  • in reply to: 360 video (non VR, 2D, Panoramic) #24489

    Joe Dunfee
    Forum Member
    • Forum Posts: 2
    • ★

    I know this is an old thread. Though, sometimes projects are delayed or take a lot longer than expected. If it is complete, please let us know how it went.

    If it is not too late to contribute, before there were 360 deg, specialized cameras, I recall reading about multi-camera rigs.

    It sounds like you only need to do this a few times. So, I wonder if you might simply use multiple cameras. Mount the Arrange them in the same orientation and position as your your ideal view point (probably around 5′ from the ground, and roughly in the center of your VR room. The film your subject. Since you have two projection, pairs, I would do two separate rigs,each with a pair of cameras facing opposite directions. They may only need the equivalent of a 35mm lens, to cover the area of the wall you are trying to project onto. The goal is to have the same lens angle of coverage as your projectors.

    Note that I don’t think you can use your 360 cameras to project the way you have your projectors arranged and use the same footage. You are asking your video projector to show the view point from a person that was standing several feet away.

    So, even if you get your 360 deg camera, you probably should shoot your footage from two separate spots.

    And rather than have your projectors try to merge their images, assume they are broken up by a column in the room. That is not an usual real situation anyway. Just put a real column (can be painted cardboard tube used for carpets) between the two screens on each side.

    Also, you are probably going to have a lot of ambient light in the room that will tend to wash out the projection. So, you may need to get some ambient light rejection screens, and very bright projectors. Also, try to keep the patient’s light arranged so it doesn’t spill out any more than necessary.

    -Joe

Viewing 1 post (of 1 total)